Safety matters to everyone at Show Support.
The principle of responsibility means that we all have responsibility for our own safety and that of our colleagues. As a company we try to make jobs as safe as we can. However, we will only be incident free if each one of us, whatever our positions within the company, accepts their accountability for following the rules and works safely and sensibly to avoid risks.
The booklet has a number of purposes:
To describe the SHS Health and Safety Policy.
To explain the Company's organisation concerning Safety and to outline employee’s responsibilities.
To give guidance as to the arrangements for assuring safety onsite and for dealing with an emergency should it arise.
To overview our Health and Safety guidelines.
To summarise our approach and to encourage discussion and analysis to improve our Safety Performance.
Please read this booklet carefully. Ensure you know and apply the safety systems and procedures relevant to your job. Above all, help us make our company safe as well as efficient and successful. Management welcomes any other thoughts or ideas that would increase the safety of our workplace.
Note:
Show Support Pty Ltd reserves the right to modify, revise or supplement policies and portions of this handbook as appropriate. Employees will of course be notified in writing of any such changes to the employee induction handbook as they occur.
HEALTH & SAFETY POLICY
Commitment:
Show Support Pty Ltd is committed to providing a safe and healthy workplace for all of our workers.
Show Support Pty Ltd further recognises its responsibilities to provide a safe and healthy work environment for contractors, clients, visitors and the public.
Scope:
This policy covers all activities and persons working within any premises of, or onsite for, Show Support Pty Ltd.
Objective:
The objective of this policy is to ensure all workers are able to work in an environment which doesn’t cause harm to them and where they contribute to continuously improving work health and safety within the Show Support Pty Ltd business.
Policy:
Show Support Pty Ltd provides, maintains and promotes a safe work environment and safety management system that is characterised by:
A systematic approach to identifying, assessing and controlling health and safety hazards and risks through the development and implementation of suitable procedures;
Ensuring as far as practicable all operations conducted by workers are in accordance with relevant legislation and regulatory requirements and relevant industry standards;
Effective management demonstrated by commitment and direct involvement at all levels of the company;
Effective two-way communication as an integral part of every job;
The provision of appropriate facilities, equipment, education, training and supervision for workers to ensure healthy and safe working conditions and methods.
Responsibilities:
Creating a safe work environment and care for the environment is the responsibility of all Show Support Pty Ltd workers.
To achieve the stated policy objective, the commitment and contribution of each and every worker is required through:
Taking responsibility for the health and safety of themselves and their fellow workmates;
Not compromising personal health and safety in the mistaken belief that other requirements are more important;
Considering health and safety as an integral part of their work.
Show Support Pty Ltd Management are required to:
“It is the responsibility of managers and employees to demonstrate a personal commitment to our Health & Safety policy.”
AUTHORISED BY:
Show Support Safety Committe 2018
LEGAL POSITION
While we recognise our legal position, the way we run our company means that we regard our legal obligations as the minimum standard that we expect to achieve.
We all share in this duty and as individual employees, in a venue or at a customer's premises we have additional duties to:
With the assistance of the company where possible take care of our own health and safety and that of others who may be affected by what we do.
Comply with company safety procedures and policies.
Not misuse or interfere with anything provided for our health, safety and welfare.
ORGANISATION
Our policy clearly states our commitment to high standards of health, safety & welfare.
Employees are asked to take on responsibility for their own & others’ health & safety, exercising initiative and making decisions as their tasks require.
To achieve this, managers are responsible for ensuring:
That all employees look at their own area & identify any specific risks & act accordingly.
That job supervision & standards of performance deal in detail with the safety requirements & systems particular to their area.
That associates working in their area receive appropriate training
That visitors & contractors are properly safeguarded.
The following sections outline the safety responsibilities of all employees.
RESPONSIBILITIES
MANAGING DIRECTOR & OPERATIONS MANAGERS
At any level have the responsibility and authority to ensure that the company's objectives are achieved. They will identify & support measures to eliminate unsafe acts, procedures, conditions, equipment and hazards of all kinds.
Managing Director and Operations Managers must:
Promote and maintain an ongoing commitment to our Work Health and Safety Management system.
Be aware of the current legislation and obligations of Show Support Pty Ltd in the area of Work Health and Safety.
Formally approve the company work health and safety policy, policies, procedures, safe work method statements and inductions and review them as necessary in consultation with the elected SHS Safety Committee.
Formally approve all WHS documentation accessible to all SHS employees and found online under: https://www.showsupport.com.au/whs/ and review when necessary in consultation with the elected SHS Safety Committee, including:
SHS Site Induction
Venue Safety Inspection
Orientation Induction
Competency Assessment
Policies
Procedures / SWMS
Recruit Induction
Pre-Job Safety Checklist
Report Safety Issue form
Incident Report Form
SECTION MANAGERS, FIELD MANAGERS & CREW CHIEFS
Are responsible for the prevention of incidents and illnesses arising from the work methods and environment. Their performance as a Crew Chief, Field Manager or Section Manager includes their ability to identify, reduce and prevent incidents and potential hazards.
Section Managers, Field Managers & Crew Chiefs must:
Ensure that the mechanisms for identifying risks are in operation and effective.
Use approved procedures for atypical operations and ensure that they are efficiently planned and authorized.
Provide adequate training that is properly coordinated and recorded
Follow up health/safety suggestions and incidents promptly and report these to SHS Operations on 1300973016 and/or via the Feedback Form which can be found online at: https://www.showsupport.com.au/feedback/ or via the Incident Report Form which can be found online at: https://www.showsupport.com.au/crew/incident-report-form/
Ensure appropriate disciplinary action is taken when safety practices are contravened.
Ensure consistent high safety standards are met.
Consult with management on plans to eliminate safety issues at source.
SHS Crew Members
In carrying out their job must assume responsibility for their own safety and for that of their workmates by supporting the WHS Program, by using Safety equipment provided and identifying & correcting unsafe acts and unsafe conditions.
Crew Members must:
Working together with all colleagues on matters relating to safety.
Wear the correct PPE on ALL Shifts – Steel cap safety shoes.
Bring the correct PPE to ALL Shifts and wear when instructed – SHS Hi Vis Safety Vest and Hard Hat.
Not to act in a manner to endanger themselves or others.
Ensure that contractors and visitors for whom they are responsible comply with company procedures.
Report incidents, near misses and any unsafe situations to their Crew Chief/Field Manager/Section Manager and/or report by calling SHS Operations on 1300973016 and/or report by using the Incident Report Form
.
Identify and evaluate safety risks and recommend action.
In the event of immediate danger the operation must be stopped and the Crew Chief /Field Manager/Section Manager informed immediately and SHS Operations called on 1300973016
SHS SAFETY REPRESENTATIVES
All employees are eligible to become elected as Safety Representatives.
Are members of the SHS Safety Committee.
Provide a good example to others by their behaviour.
Participate in enactment of Safety Policy. E.g. Audits, investigations, meetings.
Participate in the development of safety policies, procedures and SWMS.
Formally approve safe work policies, safe work procedures and safe work method statements (SWMS) found online at: https://www.showsupport.com.au/whs/
Exercise their roles in a responsible way.
Encourage other employees to be involved in safety programs and to report any unsafe conditions
RETURN TO WORK/REHABILITATION
We will strive to assist workers to return to their pre-injury or illness occupation as early as possible, or alternatively, to access the services of an approved rehabilitation provider to consider options for a return to other gainful employment either with this company or another employer.
Our objectives are:
To establish a systematic approach to occupational rehabilitation services for all workers
To develop and encourage the expectation that it is normal practice following work-related injury, illness or disability for people to return to meaningful, productive employment at the earliest possible time
To establish that rehabilitation is the usual course of action, and, when appropriate, the managed, safe and early return to meaningful, productive employment should begin at the earliest possible time, and
To appoint a case manager from within the organisation or to obtain the services of an approved rehabilitation provider to oversee the workplace rehabilitation process.
SAFETY ISSUE REPORTING
Report any unsafe conditions to your Crew Chief/Field Manager and complete a Report Safety Issue form
Show Support Pty Ltd encourages all staff to report any safety issues so that risks can be managed.
REPORTING INCIDENTS
All incidents and near misses must be reported to SHS Operations using the Incident Report Form. Even incidents which do not cause injury must be reported, so that procedures can be improved to avoid repetition
Call 0295562011 or email [email protected] anytime regarding matters of safety.
MEDICAL TREATMENT
All injuries, however slight, must be reported to the First Aid Officer using the Incident Report Form , & recorded in the SHS Injury and Incident register.
Prompt & proper medical treatment can prevent problems later & also ensures that a record has been made of the incident
All incidents involving medical treatment need to be reported & investigated assessed to avoid repetition.
EVACUATION PROCEDURE
When you are notified of an emergency situation be prepared to shut down your work station or stop performing any tasks that have been allotted to you. Do not do anything until given instructions.
In an emergency situation, if there is a fire warden or safety officer you must obey their instructions.
If you are instructed to evacuate the building, shut down your work station or stop performing any tasks that have been allotted to you and proceed in an orderly manner t0 the nearest exit and assemble at the assembly point.
Crew chiefs/field managers or the most senior employee will be responsible for roll calling their people. Any missing persons must be reported immediately to the chief fire warden or venue representative in charge.
GENERAL SAFETY GUIDELINES
General
Follow the specific safe rules that apply in areas that you have to work in.
Ensure that you are familiar with the procedure in case of emergency.
In the event of any object falling, move immediately out of the way & warn all other personnel. E.g. “HEADS!”
Always lie truss flat on the floor. Never stand truss upright on one end.
Food, drinks, cigarettes & mobile phones are a distraction when handling equipment. Inform a Crew Chief/Field Manager if time out is needed. Keep both hands free to carry out the work task.
Do not under any circumstances help yourself to food or refreshments in the back of house areas in hotels or any venues to avoid the risk of food poisoning.
“When representing Show Support & our clients in a corporate environment such as a hotel, always consider general behaviour. Be safe, polite & courteous to anyone & everyone. Drinking, smoking & eating is not allowed whilst working.”
Electricity
Never take risks with electrical equipment. Compared to other incidents, electrical incidents are ten times more likely to be fatal.
Ensure that you do not exceed the rated outputs of power outputs.
Report all defects.
Only electrically trained personnel should work on electrical equipment.
All leads on appliances used must be tested and tagged.
Electricity is safe when treated with respect and used correctly. Contact with live parts may cause shock, burns, loss of consciousness, cardiac arrest and may be fatal.
Visually inspect electrical tools, extension leads, equipment, for damage or exposed parts before use on every occasion. Look for a current test tag affixed to the item, and for damage, twists or kinks.
Electrical work covers work done by licensed people but not tasks such as connecting a flexible cord plug and socket if supervised/ trained by a competent person, or replacing a light bulb.
No ‘live’ work is permitted (High-Risk Work)
Do not open electrical switchboards
Visually inspect portable or production electrical equipment and props for obvious damage, wear or other unsafe conditions before use
All portable electric tools and equipment, electrical production equipment and props, and students’ electrical items require a current electrical test tag by SafeWork NSW’s requirements. You only need to inspect double insulated equipment.
Test and tag labels are a suitable record of the test. Test and tag labels alone do not signify equipment is safe to use. Out of test date, items will be withdrawn from service and re-tested by a competent person.
Trip-test Residual Safety Switches (‘RCD’ or ‘Safety Switch’) according to WorkCover’s guidelines/ Australian Standard
Trip-test and reset dimmer -rack and portable production distribution board Residual Safety Switches (‘RCD’ or ‘Safety Switch’) before every performance
Keep alert for three phase power outlets without an RCD for dimmer racks
Do not use double-adaptors. Use power-boards instead
Do not use electrical items in damp, wet or exposed areas including outdoor events
Do not block access to electrical switchboards – emergency access may be required
Do not repair electrical items yourself. Danger Tag faulty item and withdraw it from service by an electrician or competent person.
Damaged or Defective Services or Equipment
The operation of incomplete, damaged, or malfunctioning equipment may cause serious injury or death.
An ‘OUT OF SERVICE’ or ‘DANGER’ tag indicates the do not use the item.
‘OUT OF SERVICE’ and ‘DANGER’ tagging applies to all building services, plant, and equipment including ladders, scaffolds, tools, and equipment.
Where items appear unsafe, faulty, damaged, malfunctioning, unserviceable, or has missing parts, it must be isolated/turned off, and removed from service immediately if it is safe to do so, and labelled with an ‘OUT OF SERVICE’ or ‘DANGER’ tag.
Report tagged items and equipment safety issues to your Manager or Supervisor as quickly as possible.
Do not remove ‘OUT OF SERVICE’ or ‘DANGER’ tags without consulting your Manager or Supervisor.
Hand Tools and Power Tools
Hand tools may cause lacerations or abrasions, eye, pinch or ergonomic injuries. Examples of hand tools include nail guns, sharp edge tools, chisels, hand knives, files, saws, staple guns, drills, powered hand tools.
Safety Issues include using a wrong tool for the job, tools in poor condition, incorrect method of use for a tool, poor storage, or movement with tools, ergonomic safety issues, generating flying pieces or sparks when using tools, and not using appropriate PPE.
Show Support supervises and assesses the competency of their staff, plus access to and the safe use of tools and machinery relative to their risk exposure.
General guidelines:
Inspect your tools before each job to ensure proper condition
Use the right tool for the job
Do not misuse tools, e.g. using a screwdriver as a chisel
Keep tools in good condition
Do not use broken or worn tools
Use tools the way they were intended
When using a knife, cut away from the body and keep hands and body clear of knife stroke
Do not attempt to repair electrical tools
Report faulty or damaged tools to your Manager. Use a Danger or Out-of-service tag to warn others
Store tools in a safe place. Use edge protection on sharp tools
Do not store tools overhead
Keep tool cutting edges sharp, so the tool will move smoothly without binding or skipping
Maintain a good grip of hand tools and stand in a balanced position to avoid sudden slips
Wear gloves when necessary to protect your hands
Keep clothing, gloves and loose materials clear of moving parts
Wear appropriate personal protective equipment
Keep the work area clean, dry, well-lit, and free of obstructions when possible
Be cautious of spark-producing hand tools when working near flammable materials
Consider ergonomically designed tools to fit the tool to the worker, especially those tools that are utilised frequently and repetitively during the day.
Machinery
Know how to stop machinery in an emergency;
Do not attempt to work on any unguarded machine in motion. Stop it, make sure it is isolated correctly, and implement safe working procedures and conditions.
Do not interfere with or remove guarding on any equipment.
Transport
All vehicles are potentially dangerous. As a driver or as a pedestrian, act with care and consideration.
Keep to speed limits on and off company sites.
Do not allow work load to interfere with good driving abilities.
Take appropriate time for rests when driving.
Ensure when using company vehicles that they are properly equipped for emergencies or bad weather and that you have appropriate safety equipment. Specific rules apply to drivers of all fork lift trucks (LF) and powered hand trucks and must be observed.
Do not drive any type of LF unless you have been trained, ticketed and authorized.
PPE: Protective Clothing and Equipment
Always wear steel capped safety boots or shoes on all jobs.
Always wear hard hats when specified by the venue or client and at any time when riggers or machinery are operating overhead.
Always wear safety vests when specified by the venue or client and at any time when forklifts, trucks or machinery are operating nearby.
Always use the correct protective clothing and safety equipment for the work you are doing and encourage others to do the same.
Ear protectors to be worn in if working in any high noise areas.
Employees must keep visitors in designated parts of the plant.
Ensure all equipment is maintained accordingly.
Rigging
When rigging any equipment, ensure that only qualified, ticketed personnel perform the task.
Ensure when rigging any slings, shackles, carabiners, O-rings, safety wires etc have a correct SWL tag.
Ensure all slings are free from corrosion, fraying or any sort of damage. If they are do not use them and see to it that they are not to be used again.
Ensure all shackles are housed correctly.
Any block-and-tackle or rope must be kept in good working order and checked regularly for damage.
Safety harnesses must meet Australian Standards and have correct lanyard.
Safety harnesses must be worn whenever necessary.
Ladders
Make sure any ladders used are in good condition with the ANSI label in place.
Check ladders for defects before use. Defect ladders should be replaced immediately.
Be aware of where you position a ladder. If you are near a doorway or blind corner, either move the ladder, or barricade the area prior to erecting the ladder.
Ensure any ladder is secured when erected, with a stable footing.
Always have 4:1 ratio with extension ladders and tie off the top to a fixed point.
Have someone holding the base of a ladder to maximize stability.
Never use ladders horizontally as a walk way or scaffold.
Clean off dirty or wet hands, gloves or footwear before ascending a ladder.
Do not stand on the top or second highest steps of any ladder.
Use both hands & face the ladder when ascending or descending, remember three points of contact is the rule i.e. two feet and one hand.
Use ladders only where other methods of working at height are not practicable. Safety Issues include working at heights, falls, dropped items on persons below, e.g. tools, production equipment. Risks include lacerations, grazes; crush impacts, head injury, permanent disability.
Do not substitute other things for ladders
Use industrial grade, well maintained ladders selected for the task
Inspect ladders for safety before use. Do not use or repair faulty or damaged ladders. Ensure the ground is firm, and the surface is level. Completely open step ladders
Do not attempt to carry heavy loads or equipment while climbing a ladder or access device
Do not over-reach to the work area
Tasks such as arc-welding, oxy-cutting are not permitted while working on ladders
During the ascent and descent, you must be capable of retaining three points of contact with the ladder
Do no use aluminium ladders where there is a chance of electric shock
Use correct manual handling techniques to move ladders
Provide fall protection controls if a person can fall more than two metres.
Good Housekeeping
A large proportion of injuries are due to slips and falls. All employees are responsible for the housekeeping and tidiness of their own area
This applies to all employees, wherever they are working.
Make sure corridors and escape routes are kept free from obstruction.
Put all waste into appropriate containers.
Clean up any spills using the correct procedure.
Do not leave cables exposed in walkways. Always ensure that they are secured.
Always gaff down or use cable trays where cables are run across any doorway whatsoever regardless of whether or not that doorway is an emergency exit. Always use plenty of gaff and gaff cables in a railroad fashion i.e. side by side and parallel.
Stack roadcases, materials and equipment neatly.
Lockout / Tag out
Do not start work on any equipment until all potentially hazardous energy sources have been isolated by locking and tagging.
When machinery/equipment is identified as unsafe for use it must immediately be locked out and your manager informed.
Working at Heights
Never improvise to allow yourself to reach things as many incidents are caused by falls.
Don't stand on chairs, pallets or roadcases or climb on other unsuitable objects.
Safety Harnesses must always be worn when working at heights.
Use of scaffolding on site must comply with current Workcover Regulations and, if appropriate, assembled & changed by licensed riggers or scaffolders.
The operation of hoists must be undertaken with careful regard to the security of items being lifted and any obstructions or personnel in or around the area. Barricade the area if items may fall, or in areas of public access.
Hoists, forklifts and elevated work platforms are only to be operated by licensed personnel.
Manual Handling
Avoid back problems by lifting correctly.
Make use of your leg muscles - bend your legs and keep your back straight.
Lift only what you can manage comfortably.
If you are not trained in manual handling please let your Crew Chief/Field Manager know so they may organise your training.
There are certain techniques employed when lifting roadcases. Make sure you are aware of them and employ them. Never use the handles as they can break off, always lift them from underneath with the correct amount of people. Always listen to the Crew Chief/Field Manager or the most experienced person and do it the way they say.
Always have a suitable number of people to lift heavy loads. If a roadcase weighs 60 kilos, then don’t attempt to lift it with less than four crew.
When packing or unloading trucks always follow the instructions of the Crew Chief/Field Manager or the most experienced person in the truck. One person only should call the truck pack to ensure maximum safety.
Never allow too many people in the truck at one time. Generally, four people to pack it and one to call it.
When pushing roadcases up ramps, have one crew member behind it pushing it up the ramp and two crew either side of the ramp, holding the handles, assisting up the ramp safely.
NEVER LET GO OF A ROADCASE WHEN YOU ARE AT THE TOP OF THE RAMP. Keep holding it until one of the truck packers takes it from you or until it is safely resting against the wall of the truck with no possibility of rolling into anybody.
In wet or rainy conditions, slow down and take extra precautions for safety.
If any equipment falls GET OUT OF THE WAY AND SHOUT A WARNING. Never attempt to save any item once it has gone past the point of no return. Your safety is far more important than any equipment no matter how expensive it is.
Drugs and Alcohol
We are committed to a working environment where all employees and management recognise the health and safety risks associated with alcohol and drug use.
SAFETY IS A STATE OF MIND
Describing the company's safety policy, explaining our individual responsibilities and giving some useful safety guidelines is part of the campaign for our goal of zero incidents.
But the most important step is for all of us to be aware of the standards for working safely and what's more, be personally determined to follow them.
QUALITY - Short cuts are dangerous.
RESPONSIBILITY - Your responsibility is to carry out safety procedures at all times
MUTUALITY - Remember everybody benefits from a safe environment.
EFFICIENCY - Plan, don't leave safety to chance.
FREEDOM - Improving our safety preserves our freedom.
YOUR SAFETY HANDBOOK ACKNOWLEDGEMENT
I acknowledge receipt of Show Support Pty Ltd. “Safety Handbook” and I undertake that I have read and understood its contents.
If there is any element of the handbook that I do not fully understand, I undertake to enquire of SHS Operations to its full meaning and interpretation.
